40W CO2 Laser Engraver / Cutter - Specifications
8 January, 2012
| Machine - Overall | ||
| Working Area (XYZ) | 300 x 200mm | |
| Max.workpiece size | 300 x 200mm | |
| Machine Size | 800 x 500 x 250mm | |
| Machine weight | 32kg | |
| Stepper motors | 57 two-phase 1.45A-2A | |
| Resolution Ratio | 0.026mm (1000dpi) | |
| Resetting Positioning | <=0.001mm | |
| Consumable Parts | Laser Tube, Focal lens, Reflection lens | |
| Also included | Water pump to circulate water through the tube to keep it cool. Exhaust Fan with 2m of ducting, to carry away the smoke produced. USB cable, Printed Manual | |
| Laser Tube | ||
| Power | 40W | |
| Life | 1000-1300 Hours | |
| Engraving Speed | 0-180mm/s | |
| Drivers and Software | ||
| Control Method | USB Port | |
| Software | Moshidraw - Requires provided USB Key to run the software. Not compatable with other software and the controller board is also provided by Moshidraw. Some sources on the internet suggest replacing the controller board with something more open source - wish we had the time to try it! | |
| Operating Voltage | 240VAC | |
| Communication Interface | USB | |
| Image Formats | Moshidraw can import the follwing formats: PLT/DXF/BMP/JPG/GIF/PGN/TIF | |